Lindy HDBaseT Presentation System with Control Keypad
We will send you a notification as soon as this product is available again.
-
Estimated delivery: -
-
Free return within 14 days of purchase.
An HDBaseT multi-AV transmitter with support for HDMI, VGA with audio and USB inputs which can be surface mounted. An HDBaseT receiver with dual channel analogue audio extraction, microphone input, RS232 and USB control from an interactive board, designed for discreet installation. Finally, a separate wall mounted room control panel is included to quickly switch between input devices, adjust volumes and power on or off the display.
Both the multi-AV transmitter and control panels are both designed using PoH (power over HDBaseT) which provides power to both units alongside data using a standard Cat.6 network cable. This removes complexity from installations by allowing a single power supply to provide power to the entire system.
4K UHD video, multi-channel and digital audio formats including DTS-X and Dolby Atmos can be transmit 40m (131.23ft) over a single HDBaseT connection allowing the receiver can be conveniently placed in a wall or ceiling cavity depending on the locations of other connected devices such as a display, projector, sub-woofers and speakers. Distances up to 70m (229.66ft) are possible with 1080p video signals.
The inclusion of a relay port on the receiver allows room automation with devices such as a motorised projector screen or lighting to be configured to trigger once video devices are connected or disconnected.
Using reliable HDBaseT technology, single cable installation and PoH means this system is perfectly suited for education in a classroom or training room environment. Control over this system is managed through not only the wall plate, but also from a web GUI which is freely available on any device occupying the same network, including mobile devices. This can be used to switch or set a video input, display device connection status', determine when the relay device is used and much more.
HDBaseT and the HDBaseT Alliance logo are trademarks of the HDBaseT Alliance.
Please note: The Transmitter Wall Plate requires a double gang US Style backbox and the Control Wall Plate requires a single gang US style backbox, both with hole spacing of 8.33cm (3.281')
| Name | Lindy HDBaseT Presentation System with Control Keypad |
|---|---|
| SKU | 38288 |
| Vendor | Lindy |
We have a 14-day return policy, which means you have 14 days after receiving your item to request a return.
To start a return, you can contact us at sales@topav.co.uk. Please note that returns will need to be sent to the following address: Unit 4C Birches Industrial Estate, Felbridge, East Grinstead, West Sussex, RH19 1XZ
Returns for Businesses/Organisations (Non-Consumers)
If you are a business or organisation and wish to return unused items within 14 working days, a 20% restocking fee will be applied.
You can request a return by emailing sales@topav.co.uk. If your return is accepted, we’ll send you an RMA Number. Items sent back to us without this, will not be accepted.
All returned items must be in their original packaging and in perfect condition. While we strive to minimise costs for you, please be aware that return shipping is the customer's responsibility.
Returns for Private Consumers (Consumers)
Under the Distance Selling Regulations, if you are a private consumer, you have the right to cancel your order within 14 days of receiving your items for a full refund (including delivery charges). If your return is accepted, we’ll send you an RMA Number. Items sent back to us without this, will not be accepted. This policy does not affect your statutory rights under UK consumer law.
Damages and issues
Please inspect your order upon reception and contact us immediately if the item is defective, damaged or if you receive the wrong item, so that we can evaluate the issue and make it right.
Exceptions / non-returnable items
Certain types of items cannot be returned, like custom products (such as special orders or personalised items), final sale items and special order items.
Refunds
We will notify you once we’ve received and inspected your return, and let you know if the refund was approved or not. If approved, you’ll be automatically refunded on your original payment method within 10 business days. Please remember it can take some time for your bank or credit card company to process and post the refund too.
If more than 15 business days have passed since we’ve approved your return, please contact us at sales@topav.co.uk
If you have any questions or concerns, please contact us at sales@topav.co.uk
TopAV is a trading name of Strive AV Limited, a company registered in England and Wales. Company number: 04102256, VAT Number: GB769341302, Telephone: 01342 649575, Address: TopAV, Unit 4C, Birches Industrial Estate, Felbridge, East Grinstead, RH19 1XZ